By Ken Chien and Paul Robbins, Castool; Chris Jowett, Rio Tinto Aluminium; and Yu Wang, Mechanical and Mechatronics Engineering Dept., University of Waterloo Introduction When extruders decide to install a new press they naturally consider the product mix and profile size and weight (lb/ft). Depending on the run-out table, this determines the ideal billet weight. […]
For a number of years, the Aluminum Extruders Council (AEC) has conducted the annual Key Indicator Survey, which provided information on the press performance (pounds per press hour, scrap percentage, etc.) of participating AEC members. In early 2017, the AEC initiated a new survey program, the Press Productivity Survey, which replaces the prior version and […]
By Tom LaCombe, Bosch Rexroth Corporation. Editor’s Note: This article first appeared in the April 2017 issue of Light Metal Age. To read more articles from this issue, please subscribe. A significant portion of extrusion press and system capacity in the Americas and Europe is comprised of press and auxiliary equipment that has been installed and […]
UACJ Automotive Whitehall Industries, based in Ludington, Michigan, placed an order for the supply a HybrEx®25 extrusion press from SMS group in response to a sharp growth in North American demand for automotive aluminum structural materials and parts. The 25 MN (2,750 UST) press will be the third SMS press for Whitehall and the first […]
The August 2014 issue of Light Metal Age is now available. The digital edition has been released to subscribers and the print edition will be shipped next week. The cover features the newly built HybrEx 25, the radically different 25 MN extrusion press designed by the SMS Meer R&D and Technology Group headed by […]
