Presezzi

Subscribe Now

  • Figure 1. Each of the extrusion lines is outfitted with fully automated handling systems.

    Posted in:

    Benkam Targets North American Architectural and Automotive Market

    Located in Tashkent, Uzbekistan, Benkam Alu Extrusions, part of AKFA Group, is the only major manufacturer of aluminum profiles in Central Asia. Launched by AKFA in 2015, Benkam is a dynamically evolving company that utilizes advanced technologies to meet internationally recognized standards (such as ISO). The company has a strong market presence in 15 countries […]

  • One of two 50 tonne tilting melting furnaces installed in SCM’s new remelt and casting plant. (All photos taken by Chip Jackson and Nick Harrison, SCM.)

    Posted in:

    SCM Celebrates 20th Anniversary with New Casthouse and Extrusion Line

    By Andrea Svendsen, Managing Editor. Service Center Metals (SCM), an aluminum extrusion manufacturing company headquartered in Prince George, VA, is celebrating 20 years of continuous operation this year. As the company moves into its third decade, it is completing a $127 million investment in a new remelt and casting plant and new extrusion plant near […]

  • Figure 4. Observing the installation of the cooling table and stretcher.

    Posted in:

    Aluminum Insights’ Support and Service

    By Andrea Svendsen, Managing Editor. Aluminum Insights is currently in the process of performing the final installation and start up of its new extrusion facility in Syracuse, IN. Founded by Steve Brenneman, Jeff Miller, and Niles Graber-Alvarez (Figure 1), the startup company aims to serve customers in the Upper Midwest with a high level of […]

  • Presezzi extrusion press

    Posted in:

    New England Extruder Expands

    By Andrea Svendsen, Managing Editor. Under the leadership of Momentum Manufacturing Group (MMG), Vitex Extrusion completed phase one of a $23 million capacity expansion project at its extrusion operation in Franklin, NH. This included the relocation of its fabrication department and the installation of a $13.5 million, 8 inch press line, which doubles the company’s […]

  • Aluminum Insights

    Posted in:

    Aluminum Insights Breaks Ground on New Extrusion Facility

    Aluminum Insights broke ground on its new, $17.5 million, state-of-the art aluminum extrusion facility in Syracuse, Indiana. Founded in 2020, Aluminum Insights is a start up company that aims to serve a select group of customers in the Upper Midwest to support their extrusion needs, integrate seamlessly into their supply chain, and partner in innovation. […]

  • An aluminum billet being loaded into the billet heater prior to extrusion at Benkam Alu Extrusions in Uzbekistan.

    Posted in:

    Benkam Launches Multi-Year Expansion to Increase Extrusion Capacity

    Benkam Alu Extrusions, owned by AKFA Group, is one of the major manufacturers of aluminum profiles in Central Asia. Located in Tashkent, Uzbekistan, the company recently announced that it is launching a multi-year expansion project, which will more than double its aluminum extrusion production capabilities. This expansion is a part of the company’s overall strategic […]

  • Vitex Extrusion- New aluminum extrusion press line.

    Posted in:

    Vitex Investing in New Extrusion Line to Double Output

    Vitex Extrusion, a division of Momentum Manufacturing Group, plans to invest $12 million in the first phase of a new aluminum extrusion press line for its Franklin, New Hampshire, facility. The investment will double the extruder’s current output to 55 million lbs and support growing demand from customers and partners for aluminum extrusions and value-added […]

  • extrusion

    Posted in:

    Vimetco Investing in New Extrusion Line in Romania

    Vimetco Extrusion, a subsidiary of ALRO S.A., plans to invest €10 million in the installation of an automated extrusion line for the production of value-added aluminum profiles in Romania. “The expertise in creating high and very high value-added products is obtained only through constant investments in innovation and outstanding employee training,” said Marian Năstase, chairman […]

  • Figure 1. The 45 MN, 10 inch direct press was designed with the demands of the automotive industry in mind.

    Posted in:

    Hydro Cressona Serves Automotive Industry with New Highly Automated Press Line

    By Andrea Svendsen, Managing Editor. The Hydro Extrusion North America facility in Cressona, PA, has been in operation since 1942, when it was commissioned by the U.S. government to support World War II efforts. Today, the over 1.6 million sq ft site has ten direct and indirect extrusion presses, ranging in sizes from 10 to […]